Monday 7 April 2014

sock blocking part IV

the finished sock blockers are now ready to shape some socks, see it stage by stage here, here and here...





Friday 4 April 2014

sock blocking part III

I've done the 'filling in' bit for my sock blocker, see earlier posts about them here and here. Now for sealing/waterproofing:



Thursday 3 April 2014

sock blocking part II

Recently I started doing the second design for my pair of sock blockers; the first one is here. After a lengthy drawing/design process I began burning the outline onto the MDF:








So that's the hard bit done...






Sunday 15 September 2013

the chairs: part II

See part I here

...And now for sanding. Gave my chair (the armless one) a keying, ready for some paint. I chose a garden furniture paint for durability. After sanding the back, I realised the chair had been varnished somewhere in between it's initiation and my purchase of it. It has a quite wonderful shiny brass inlay that had been varnished over:




Decided to paint right over the inlay for my chair.



I used 'tru oil' on the other chair which preserved the inlay nicely, and made it super shiny too:






the chairs: part I

I purchased a couple of second hand chairs many months ago with the intention of restoring/changing them; the armless one for myself, and the carver for my mother. This is a back blog from a few months back. Here they are as bought:








I began with re-upholstering them. Nice new squarey fabric:




Then I spent quite a bit of time 'fixing' my chair; in that one of the legs wasn't sitting straight. I took it apart, sanded, glued and re-set it, filled in the holey bits, but now that I've been using it, it's gone back to how it was before, which was a shoogly chair at best.

Part II here











Wednesday 4 September 2013

sock blocking beats!

I have been working on a little drawing/design for some sock blockers, influenced by a combination of pictish carvings and polynesian tattoos. I have just begun to woodburn the design onto the blockers, which I cut and shaped out of MDF:






The other blocker will feature a different design, I'll update about that soon.

Sunday 26 May 2013

knitted sock hanger

I have a south facing wall which I hesitate to put pictures up on, in case of fading etc., so I decided to make it a feature for my knitted socks, a wall-mounted washing line if you will. I thought dolly pegs would be excellent for this, so I painted a few of them badboys up:



and later drilled some holes in them. I don't have any more 'process' photos of me making it, so here it is the final product:










Thursday 23 May 2013

framing/shaming

Following on from my previous post about frame-making, I bought a band clamp so I could cheaply and easily make some more frames (glass-less, obviously).



I ended up splitting the corners and re-setting it about three times, trying to get it straight. Also wrecked one of the corners trying to do the job of a rebate plane with a chisel, ha. But I filled it in and it's fine. The whole shitness of the frame correlates with the shabbiness of the painting, yes, that's my statement for that. 





7-inch vinyl box... that I didn't really make.

Been trying to find vinyl storage for a while now, decided to build my own instead, cue the 6mm MDF.
Previously I made a 12-inch vinyl box out of 12mm MDF, glue and nails, but it came out a little... sarah-y, so you won't be seeing it here.
So I came up with a similar design(minus the nails), cut the board, and began glueing:


After several hours of setting/clamping, it promptly fell apart. I brought in my father to do the job properly:


IT STAYED TOGETHER. I tried again with the next piece:


IT FELL APART AGAIN. Feeling like an utter failure at woodwork, I call on my father again:




PERFECT! So the box became his project after that - dads just know how to make shit out of MDF:


And I just painted it:



Nice one, dad!